Information guides:
Warehouse buildings
Home repairs
DIY remodels
Working tools and accessories
Outdoor patio and decks

Working tools and accessories

Tips and information about flooring, home repairs and industrial flooring.

A compilation of information we thought would be helpful to you when it comes to home or office repairs.

Improvements in chain saws
In recent years, chainsaw manufacturers have made great improvements in efficiency, durability, ergonomics, and safety. Todays newer chainsaws are lighter in weight, have the ability to cut faster, and due to their improved anti-vibration systems, chainsaw operators are feeling less vibration in the arms and hands when cutting and trimming trees.

Crafting of end mills
Traditionally, end mills have been crafted from high-speed steel, which is alloy steel that stays hard at red heat. However, today end mills are mostly crafted from tungsten carbide which is a very hard gray power that is used in the manufacturing of tools, dies, wear resistant machine parts as well as abrasives.

Working With Metal Drill Bits
When working with metals it is especially important that you have the correct drill bits. If you use drill bits that were not designed to drill through metal, you are going to end up with a broken or damage drill bit. Professionals will typically use multiple drill bits when working with metal. They get a better drilled product by using at least three metal bits for each hole that is drilled.

Repairing with duct tape
Repairs made with duct tape can be expected to last for numerous years. This is particularly true if the repairs are made on metal, in a dry environment and not under heavy use. Like its original purpose, joining two piece of metal together with duct tape can keep the two pieces together for many years. Other duct tape repairs are not so permanent. Duct tape on glass will eventually begin to peel back, especially if exposed to sunlight. Likewise, its use on plastics leaves much to be desired after a couple of months.

Workers Ahead
You're driving down the road and you see a sign that reads "Road Work Ahead." Next you may see some cones and other signs that let you know that the lanes are being merged together. Finally you see the actual people performing a task. They can do so in relative security because of the use of work safety signs There are many places and applications for this type of sign. Inside a factory there will be signs that help the employees to know the safety rules of that particular job or area and these prove to be invaluable.

Safety Vests
There are different advantages for wearing safety vests, depending on the reason you need one. But the bottom line is that no matter what activity or job you are using them to help you perform safely, there is one main advantage they all have in common; safety vests save lives, and that advantage is the best one of all.

Propane and butane heaters
Patio heaters often run on bottled gas, mostly butane but sometimes propane. Bottled gas is widely available in the UK and most other countries. The regulator is supplied with the heater and clips right onto the bottle. It is easy to install. Since bottle head sizes vary, take you gas bottle with you to the dealer to be sure you get the correct size of regulator. Some homeowners in the U.S. use indoor propane heaters to heat their homes.

Prepare for emergencies with a generator
Should you supplement your uninterruptible battery-based power supply with an emergency portable diesel generator? Vendors say this question is coming up with increasing frequency with storms, blackouts, brownouts, and decreased service reliability. Some years ago, 50 million people in eight states, from New York to the Midwest, lost power for at least 24 hours in one giant blackout. The rule is that if you buy an emergency generator, be sure you know how to install and operate it properly. Also, buy the model with the output that is best for your applications.

Use of a calibrated clutch
The use of a calibrated clutch mechanism is a more accurate device for presetting torque. When the desired torque is reached, the clutch slips, consequently preventing over tightening. The most common form of this device uses a ball detent and spring. The spring is preloaded by an adjustable screw thread calibrated in torque units. The ball detent transmits force until the preset torque is reached, then the force exerted by the spring is overcome; the ball "clicks" out of its socket. This design has the advantage of greater precision and positive action at the set point. Variations of this design serve different applications and different ranges of torque. For information about torque wrenches visit Heavy Duty Torque Wrenches.com

Learning home improvement
Learning is one of our greatest tools. Children learn that they have to make an effort to learn something new. A great teaching is the saying that if you teach a man to fish, rather than just give him fish, he will learn how to survive. Home improvement is no different. Before starting your home improvement project, learn all you can, and don't forget to set up a financial plan and diagram to help guide you through the process. While learning, you will also want to avoid all the pitfalls you can. There are many tools on the market today, tile saws, laser levels and many more that can make your project go smoother.

How to select and purchase the most comfortable work boots
Three ways manufacturers measure boot sizes:
1) The average length of foot for which a work boot is suitable. For the customer, this is the best way to measure, however, it is less popular with manufacturers since it requires them to test each new model for the range of foot sizes it must fit. The manufacturer then has the burden of ensuring that the boot will fit a foot of a given length.
2) The length of the inner cavity of the boot. This method has the advantage that it can be measured easily on the finished product. However, it will vary with manufacturing tolerances and provides the customer with only a rough idea about the range of foot sizes for which the boot is suitable.
3) The length of the "last" which is the foot-shaped template over which the shoe is manufactured. This method is the easiest one for the manufacturer to use, as it only identifies the tool used to produce the boot. It makes no promises regarding manufacturing tolerances or what size of foot the boot is actually suitable. All responsibility and risk of choosing the correct size is left with the customer.

The best safety glasses are light and comfortable with very little or no optical distortion.

Find products and information for parts washing equipment.

Don't wait to the last minute to prepare your home for a power outage
Just before a hurricane is predicted to hit, there is always a rush on gasoline-powered generators. Thousands of generators are sold to homeowners who do not know the consequences of an improperly installed unit. Too often there is news of a lineman being killed by an improperly installed generator back-feeding the utility lines. Don't wait for a hurricane before familiarizing yourself with the proper installation and use of portable generators that are right for your applications.

This site will provide all of the information you need to know about work gloves.

Earplug information and guide.

Complete buyer's guide to finding and purchasing bandsaws.

Gibs advice on safety signs.

Your guide to selecting Safety mats.

Home page

About concrete coatings

About epoxy

Brands